Additive
Nucleating agents, ADVNCA series are for multiple general plastics. Thet are designed to enhance the results for both polar and non-polar polymers, including PE, PP, PET, PETG, and PA, etc. The additive improves the resin’s crystallinity to creates better mechanical properties and clarity after the process.
ADVNCA series nucleating agent surpasses other additives in several ways:
- Clarity：With the unique crystallization structure, the nucleating agents will enhance the product’s mechanical properties while maintain or improve the clarity.
- Liquid form：The ADVNCA series is in clear liquid form for better dispersion in production.
- Lower dosage：Recommended concentration starting from 600 to 1000 ppm.
- Environmental friendly: ADVNCA additive helps increase the recycled material usage rate in production without compromising the product performance. Customer achieves 40% cost down with more than 50% of recycled grade resin replacement.
| Product | Series | Target Material | Viscosity, 37.8°C (CST) | Product Form |
| Nucleating Agent | ADVNCA – S05 | Non-Polar Polymers, ex. PE or PP | 60.8 – 70.8 | *Clear liquid |
| ADVNCA – E06 | Polar polymers, ex. PET/ PETG or PA |
* Both nucleating agents can be provided in masterbatch form
| Product | Series | Characteristics | Applications |
| Nucleating Agent | ADVNCA – S05 | 1. Enhance mechanical properties; increase impact/ tensile/ flexural strength and tensile elongation. 2. Enhance the clarity level 3. Increase HDT on the PET sheet 4. Increase off-grade PET/ rPET usage in production by 10-20% | Injection and extrusion molding for film and sheet |
| ADVNCA – E06 | Injection/ blow molding and extrusion molding |
